VVDI MB BGA Tool Renew Mercedes 7G Tronic Gearbox | 您所在的位置:网站首页 › Mercedes ECU Finder MBTools › VVDI MB BGA Tool Renew Mercedes 7G Tronic Gearbox |
Here is the guide to use VVDI MB BGA tool key programmer to renew Mercedes 7G Tronic Gearbox-Virgin (W164 / W221 / W219 etc).
Note: Update your VVDI Mercedes software to latest (current 2.1.7).
After well communication is built, open VVDI MB software, Select Renew ECU/Gearbox function Select module: Gearbox Click on Read Reading data success display VIN,P/N, S/N etc info. Select Renew function If VVDI MB Tool prompt “Erase password format not correct!!! Input data error,only accept hexadmecimal data, 8 bytes!” Click OK to continue Press Get button to search erase password Display erase pass, click on Renew again This time you can see info on the bottom of the left status bar “Erase target unit success” Press Read again Mercedes 7G tronic renewal success! www.obdii365.com Related posts: How to use Xhorse Benz VVDI MB Tool to add a BGA key V2.1.4 VVDI MB BGA updated W204 W207 EIS all lost key How to add Benz W246 BGA (79) Key via VVDI MB Tool Read/Write/Renew Mercedes NEC Chip: CGDI MB or VVDI MB Tool? |
今日新闻 |
推荐新闻 |
专题文章 |
CopyRight 2018-2019 实验室设备网 版权所有 |